![]() ![]() The 2nd step is to keep them close while they are connecting. The first step is to open the Bluetooth on both devices. You can access this feature easily, in a few steps. Newer devices are able to connect with each other through the Bluetooth feature. How do you connect two devices together via Bluetooth? Both computers should be configured this way. Go to the Start menu, Settings, Network Connections, right click the cable connection (“Local Area Connection 2,” in our case), select Properties, and then, in the window that will appear, double-click on “Internet Protocol (TCP/IP).” The two options available on the screen must be set on “automatically,” as shown in Figure 11. If the remote computer cannot access the Internet, check if the USB cable is configured to get an IP address automatically from the network. ![]() In this tutorial, you will find some tips for preventing a hacker to gain access to your files. Read more about this in our tutorial Protecting Your Computer Against Invasions. If you are not using a broadband router on the computer that has an Internet connection, you should be very careful, because sharing its folders can allow anyone on the Internet to have access to your files. To share files and printers, you should read our tutorial How to Share Folders and Printers on Your Network to see how this can be done. How to share Files and Printers on your Network with or without a USB to USB cable? (Our cable is listed as “Hi-Speed USB Bridge Cable,” but your cable can use a slightly different name, depending on the manufacturer.) It should be listed under “Universal Serial Bus controllers.” See Figure 6. How to check if you installed the USB cable correctly?Īfter installing the cable as described on the previous page, you should check if the cable is correctly installed on Device Manager (right-click My Computer, Properties, Hardware, Device Manager). ![]() If you want to have Internet access and/or printer access, you should go to network mode. Now that your cable is installed, let’s see how to use it in both modes.Īs we mentioned, the link mode is the easiest and fastest way to connect two PCs using your USB cable for transferring files. You should repeat this process for the other computer. If you run the setup program or changed the mode with the cable attached, simply remove the cable from your computer and install it again to force Windows to install the correct drivers (the drivers used on link mode and network mode are different). After changing the mode, reinstall the cable and the system will recognize it automatically. This should be without your cable attached to your computer. If you want to change the mode under which your cable is working, you should run the setup program for the other mode or select the mode change on the transfer program, depending on the cable model. Changing the USB to USB cable working mode You should repeat this process for the other computer now. This will make Windows recognize it and install its drivers. If you installed the program and drivers with the cable attached to the computer, you should remove it from your computer and install it again. Windows will recognize it and install the correct drivers. So, don’t install the cable yet leave it unplugged from the computers.įigure 5: Choosing the mode inside the transfer program.Īfter you have installed the corresponding drivers (link mode or network mode), you should install the cable on the computer. This procedure must be performed on both computers, with the cable detached. You will have to install the programs and drivers that come with the cable on a CD-ROM. ![]() The cable installation process will depend on the cable manufacturer. This mode is recommended if, besides copying files, you want to have access to a printer located on the other computer (or any other computer on the network, if this computer is connected to a network) or want to have Internet access. After creating this network, you can share folders, printers, and Internet access. In network mode, you will create a small network between two computers. If you just want to copy files, that’s the mode we recommend you use, because it is easier and quicker to install and utilize. In link mode, it will work just like the very old “lap link” cables, i.e., it comes with software that enables you to select files, drag, and drop them to where you want to move or copy them to or from the remote computer. This cable can work in two modes: link mode and network mode. Now that you know the kind of cable that you should buy (on the top of this page we are listing several places you can buy this cable online), let’s talk about its installation. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |